Yuanfar Chemicals
Products: B9,daminozide
CAS No: 1596-84-5
Description: B9,daminozide as an inhibitor of the growth of dry fruit trees, it can inhibit the growth of plants.
  • Technology and characteristics
  • Product index
  • Product application
    Technology and characteristics :

    B9daminozide Basic information 

    Product Name:

    B9daminozide

    Synonyms:

    succinic 2,2-dimethylhydrazide; Daminozide; N-(Dimethylamino)succinamic Acid; N-Dimethylamino succinamic acid;

    CAS:

    1596-84-5

    MF:

    C6H11N2O3

    Melting Point:

    162-164 °C(lit.)

    water solubility:

    100 g/L

    Boiling point:

    286.06°C (rough estimate)



    Product index :


    MATERIAL SAFETY DATA SHEET

    1. PRODUCT AND COMPANY IDENTIFICATION
    Product name :  N-DIMETHYLAMINO SUCCINAMIC ACID CRYDAM 85 S.P.
    Chemical name:  N-DIMETHYLAMINO SUCCINAMIC ACID
    Use of substance/preparation:  Plant Growth Regulator
    Supplier:  XI''''AN YUANFAR INTERNATIONAL TRADE COMPANY
    No. 36, Fenghui Road
    Xi''''an 710065, China
    Emergency telephone
    number:
    86-29-8874 5613
    Environmental, Health and
    Safety Department:
    86-29-8874 5617
    Prepared by

    2. HAZARDS IDENTIFICATION
    EMERGENCY OVERVIEW
    CAUTION!
    MAY CAUSE MILD IRRITATION OF THE EYES.
    NORMAL PRECAUTIONS COMMON TO SAFE MANUFACTURING PRACTICE SHOULD BE FOLLOWED IN HANDLING AND
    STORAGE.

    3. COMPOSITION / INFORMATION ON INGREDIENTS
    I NGREDIENT % BY WEIGHT
    Daminozide
    CAS# 1596-84-5
    > 99
    Ingredients not precisely identified are non-hazardous and/or proprietary.

    4. FIRST AID MEASURES
    Swallowing
    Call a poison control center or doctor immediately for treatment advice. Have person sip a glass of water if able to swallow. Do not induce vomiting unless told to do
    so by the poison control center or doctor. Do not give anything by mouth to an unconscious person.
    Inhalation
    Move person to fresh air. If person is not breathing, call 911 or an ambulance, then give artificial respiration, preferably by mouth-to-mouth, if possible. Call a poison
    control center or doctor for further treatment advice.
    Skin contact
    Take off contaminated clothing. Rinse skin immediately with plenty of water for 15 to 20 minutes. Call a poison control center or doctor for treatment advice.
    Eye contact
    Hold eye open and rinse slowly and gently with water for 15 to 20 minutes. Remove contact lens, if present, after the first 5 minutes, then continue rinsing eye. Call
    a poison control center or doctor for further treatment advice.

    5. FIRE-FIGHTING MEASURES
    Flash point:  320 °F 160 °C
    Autoignition temperature:  263 °C
    Hazardous combustion products
    Burning can produce the following combustion products:
    Oxides of nitrogen.
    Dimethylhydrazine
    Special fire fighting procedures
    Do not discharge extinguishing waters into streams, rivers and lakes.
    Special protective equipment for firefighters
    Body covering protective clothing, full "turn-out" gear.
    Self-contained breathing apparatus.
    Extinguishing media
    Suitable: Large fires:
    - alcohol-type foam or universal-type foams
    Small fires:
    - CO2
    - dry chemical
    - water spray
    Unsuitable: - water jets

    6. ACCIDENTAL RELEASE MEASURES
    Personal precautions
    Wear suitable protective equipment., Avoid contact with eyes and skin.
    Environmental precautions
    Prevent from entering sewer system, surface water or soil.
    Methods for cleaning up
    Sweep up and collect in a suitable container for disposal.
    Avoid dust formation.
    Observe government regulations.

    7. HANDLING AND STORAGE
    HANDLING
    Handling precautions
    Do not get in eyes, on skin, on clothing., Do not swallow., Avoid dispersion of dust to reduce fire and explosion potential., Do not eat, drink or smoke when handling.
    Other precautions
    NOTE TO END-USERS: The employee protection recommendations on this MSDS may differ from those on the product label. For normal use of this product,
    always refer to the personal protective equipment requirements on the product label.
    STORAGE
    Storage requirements
    Store in a cool, dry place., Store in closed original drums.

    8. EXPOSURE CONTROLS / PERSONAL PROTECTION
    EXPOSURE LIMIT VALUES
    PERSONAL PROTECTION
    Respiratory protection
    In the absence of engineering controls sufficient to maintain airborne concentrations below recommended occupational exposure limit values, appropriate respiratory
    protection should be utilized., The determination of appropriate respiratory protection is best performed,on a case by case basis, taking into consideration the
    exposure conditions of the particular operation., Use an approved full-face air-purifying respirator. For emergency and other conditions where the exposure limit may
    be greatly exceeded, use an approved positive-pressure self-contained breathing apparatus., The respirator manufacturer should be consulted to ensure that the
    air-purifying cartridges utilized will provide adequate protection for the exposure conditions and period of wear concerned.
    Hand protection / protective gloves
    Chemical resistant protective gloves
    Eye protection
    Safety glasses with side shields.
    Skin protection
    Wear protective clothing, such as long sleeves to minimize skin contact.
    ENGINEERING CONTROLS
    Ventilation
    Apply local exhaust ventilation at points of dust generation.

    9. PHYSICAL AND CHEMICAL PROPERTIES
    APPEARANCE
    Physical state Powder
    Color White
    Odor Faint Amine
    OTHER PROPERTIES
    Boiling point Not available
    Melting point Melting point
    156 - 158 °C
    Density Not available
    Vapor pressure
    Solubility in water 180 g/l
    Solubility in organic solvents Slightly soluble
    Partitioning coefficient log POW: -1.5
    Flash point 320 °F
    160 °C
    Thermal decomposition 244 °C
    471 °F
    Autoignition temperature 263 °C
    Molecular weight 160.2
    Oxidizing properties Not applicable
    Explosive properties Not applicable

    10. STABILITY AND REACTIVITY
    Stability: This product is stable under normal storage and handling conditions.
    Stability - Conditions to avoid:
    Exposure to heat.
    Incompatible materials:
    Strong acids.
    Strong bases.
    Hazardous combustion products:
    Burning can produce the following combustion products:
    Oxides of nitrogen.
    Dimethylhydrazine

    11. TOXICOLOGICAL INFORMATION
    SWALLOWING
    Test results
    Acute toxicity:  LD50 Rat
    Result: > 5,000 mg/kg
    SKIN ABSORPTION
    Test results
    Acute toxicity:  LD50 - Rabbit
    Result: > 5,000 mg/kg
    INHALATION
    Test results
    Acute toxicity:  LC50 - Rat
    Result: 2.1 mg/l
    Exposure time: 4 h
    SKIN CONTACT
    Test results
    Skin irritation:  Species: Rabbit
    Classification: Not irritant
    EYE CONTACT
    Test results
    Eye irritation:  Species: Rabbit
    Result: Moderate
    SENSITIZATION
    Test results:  Species: Skin - Guinea pigs
    Result: Negative
    MUTAGENICITY
    Assessment: Negative
    CARCINOGENICITY
    Assessment: Negative
    TOXICITY TO REPRODUCTION/FERTILITY
    AssessmentNegative

    12. ECOLOGICAL INFORMATION
    Biodegradation:  Remark: Readily biodegradable.
    AQUATIC TOXICITY
    Acute toxicity fish:  Acute toxicity fish - LC50 - Rainbow trout (Oncorhynchus mykiss)
    Result: > 149 mg/l
    Exposure time: 96 h
    Acute toxicity fish:  - LC50 - Bluegill (Lepomis macrochirus)
    Result: 423 mg/l
    Exposure time: 96 h
    Aquatic toxicity to
    plants:
    - IC50 - Algae
    Result: 160 mg/l
    Exposure time: 72 h
    Acute toxicity to aquatic
    invertebrates:
    Acute daphnia toxicity - LC50 - Water flea (Daphnia magna)
    Result: > 99 mg/l
    Exposure time: 48 h

    13. DISPOSAL CONSIDERATIONS
    General: Avoid discharge to sewers and natural waters., Incinerate in a furnace where permitted under appropriate Federal, State,
    and local regulations.

    14. TRANSPORT INFORMATION
    DOT Classification
    This product is not regulated by DOT.
    IMDG Classification
    This product is not regulated by IMDG.
    ICAO Classification
    This product is not regulated by ICAO.

    15. REGULATORY INFORMATION
    Comprehensive Environmental Response Compensation and Liability Act of 1980 (CERCLA) requires notification of the National Response Center of
    release of quantities of hazardous substances equal to or greater than the reportable quantities (RQs) in 40CFR302.4.
    Components present in this product at a level which could require reporting under the statute are:
    **** NONE ****
    Superfund Amendments and Reauthorization Act of 1986 (SARA) Title III requires submission of annual reports of release of toxic chemicals that appear
    in 40CFR372 (for SARA 313). This information must be included in MSDSs that are copied and distributed for this material.
    Components present in this product at a level which could require reporting under the statute are:
    **** NONE ****
    New Jersey Worker and Community Right-To-Know Act (Labeling Requirements)
    Chemical name CAS# New Jersey TS Number
    Daminozide
    1596-84-5 
    Inerts

    California Proposition 65
    This product contains daminozide.
    CHEMICAL INVENTORY
    Europe: The ingredients of this product are on the EINECS inventory.
    United States: This product is subject to regulation under the US Federal Insecticide, Fungicide and Rodenticide Act
    (FIFRA) and is therefore exempt from TSCA Inventory listing requirements.
    Australia: The ingredients of this product are on the AICS inventory.
    China: This product is listed with the State Environmental Protection Administration (SEPA).
    Japan: The ingredients of this product are on the ENCS inventory.
    Korea: The ingredients of this product are on the ECL.


    16. OTHER INFORMATION
    RECOMMENDED USES AND RESTRICTIONS: NOTE TO END-USERS: This MSDS is being provided to all interested persons in accordance with federal and
    state right-to-know laws. Precautionary Statements, First Aid Statements and Directions for Use of this product by end-users are contained on the product label and
    must be followed at all times.

    STP  Standard temperature and pressure
    W/W  Weight/Weight
    0 (HMIS)
    1 (HMIS)  Slight hazard
    2 (HMIS)  Moderate hazard
    3 (HMIS)  Serious hazard
    4 (HMIS)  Severe hazard
    X (HMIS)  Personal protection rating to be supplied by user depending on use conditions
    THE OPINIONS EXPRESSED HEREIN ARE THOSE OF QUALIFIED EXPERTS WITHIN CHEMTURA CORPORATION. WE BELIEVE THAT THE INFORMATION CONTAINED HEREIN IS
    CURRENT AS OF THE DATE OF THIS SAFETY DATA SHEET. SINCE THE USE OF THIS INFORMATION AND OF THESE OPINIONS AND THE CONDITIONS OF USE OF THIS PRODUCT
    ARE NOT WITHIN THE CONTROL OF CHEMTURA CORPORATION, IT IS THE USERS OBLIGATION TO DETERMINE THE CONDITIONS OF SAFE USE OF THE PRODUCTS.



    Product application :

    Applications 

    As a plant growth retardant, daminozide has various applications as dwarfing agent, fruit-setting agent, rooting agent and preservative agent. After treatment, plants can absorb, transport and distribute to various parts of the plant. The initial effect of B9 is to inhibit the synthesis of auxin, inhibit the transport of auxin in plants and the biosynthesis of gibberellin. It can also delay the senescence of leaf lettuce, inhibit the decay and discoloration of mushrooms, and has less effect on green cauliflower and stone cypress. In addition, daminozide preserves chlorophyll in plants and prolongs the life of some perishable vegetables. 


Yuanfar Chemicals
Copyright © 2010-2015 yuanfar chemicals Inc.     Technical support:MIO Technology
yuanfar chemicals